Custom Switch to suit Ford/Mazda
This switch is to suit Ford Ranger PX1 and is an exact fit into the original business card holder (this is not suitable for the PX2) and also suitable for second-generation Mazda BT50 from October 2011.
You must edit the switch before you are able to purchase it. Icons and
text must be chosen.
We will not engrave profanity. Please double check spelling as mistakes are not eligible for a refund.
To create a switch with no text please enter ‘NO TEXT’ in the text box and we will not engrave any text on the switch. Please note: A switch without a logo and /or text will not have visible illumination.
Suitable for the Ford Ranger PX1 and is an exact fit in to the original business card holder. Also compatible with second-generation Mazda BT50 from October 2011. (This is not suitable for the PX2).
This switch has a maximum current rating of 5 amps @ 12 volts and is to be used in conjunction with a relay.
Custom engraved icon illuminates white via the dash light circuit, once the switch is pushed on, the upper clear window also illuminates blue.
Supplied with connector and 100mm length harness in blister pack.
To remove business card holder from vehicle: First remove the fuse panel cover located next to the driver’s side door, then dislodge the lower trim panel located next to the fuse panel that has just been removed. This will allow you access to the back of the switch blank (business card holder), apply light pressure to the top then the bottom to dislodge from within the dash. DO NOT try and remove the switch blank by using a screw driver this will result in damaging the dash surface.
|Make||Model||Compatible From||Compatible To|