Custom Dual Horizontal Switch to suit Toyota/Holden
£28.00
Compatability with a Holden Colorado 2017-2018 is possible only when a Lightforce Fascia is fitted.
Please note this switch is single input and dual output. e.g. Headlights and Compressor will not work from this single switch.
The LED’s in this switch are Green and Blue. Green is active when the dash light circuit is active and the switch is in the OFF position. Blue is active when the switch is in the ON position.
You must edit the switch before you are able to purchase it. Icons and text must be chosen. We will not engrave profanity. Please double check spelling as mistakes are not eligible for a refund.
To create a switch with no text please enter ‘NO TEXT’ in the text box and we will not engrave any text on the switch. Please note: A switch without a logo and /or text will not have visible illumination.
Vehicle Compatibility
| Make | Model | Compatible From | Compatible To |
|---|---|---|---|
| Holden | Colorado (fitted with LF fascia) | 2017 | 2020 |
| Toyota | 100 Series Landcruiser | 1998 | 2007 |
| Toyota | 4Runner | 2003 | 2009 |
| Toyota | FJ Cruiser | 2007 | 2018 |
| Toyota | Fortuner | 2005 | 2015 |
| Toyota | HiAce | 2005 | 2013 |
| Toyota | Highlander | 2001 | 2007 |
| Toyota | Hilux | 2005 | 2014 |
| Toyota | Kluger | 2001 | 2007 |
| Toyota | Landcruiser 75 76 78 Series | 1985 | 2018 |
| Toyota | Landcruiser 79 (Plastic Dash) Series | 1985 | 2023 |
| Toyota | Prado 120 | 2003 | 2009 |
| Toyota | Tacoma | 2005 | 2011 |
| Toyota | Tacoma (Left Side only) | 2012 | 2020 |
| Toyota | Tundra (centre console if equipped) | 2005 | 2006 |
Dual switch with a single powered input feeding two independently switched outputs suitable for early model and the 70 Series Toyota vehicles.
In addition, also compatible with the Holden Colorado 2017 on models when combined with the Lightforce switch fascia CBFASCIA2
Dual coloured illumination is only activated when the vehicles dash lights are on, green illumination with switch in the off position with blue illumination when the switch is on.
The switches can function independent to the dash lights, however will not illuminate until the vehicles dash lights are activated. A single input activates both the top and bottom switches, so if you have a series of dual switches they will need to be grouped into lighting (active with Hi beam) or active with a constant power or ACC on power.
Suitable for use with both positive and negative switched vehicles
This non-genuine OEM style switch has a maximum current rating of 3 amps @ 12 volts and is to be used in conjunction with a relay if current exceeds 3 amps.
Full customisable laser engraved icons and text to ensure longevity
Supplied with harness and connector
Australian design patent
