3 MODE LED DRIVING LIGHT
Beam Length
Colour Temp
Warranty
$510.00
Customise Your Kit
BEAST Driving Light Universal Wiring Harness - 12V
$128.00
BEAST Driving Light Wiring Harness to suit Toyota Landcruiser 200 Series 2007 - 2015
$187.00
BEAST Driving Light Wiring Harness to suit Toyota Landcruiser 200 Series 2016 - 2021
$187.00
Anti-Theft Security Set - BEAST / HTX2 / Genesis / Venom / Striker
$56.00
BEAST Amber Filter
$39.00
BEAST Black Cover
$39.00
BEAST Clear Filter
$39.00
- 1 x BEAST 230mm LED Driving Light
- 1 x Clear filter
- 1 x Black filter
- 1 x 4 pin waterproof harness adapter
- 1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
1 LUX @
1497M DISTANCE
60M WIDE
1 LUX @
778M Distance
140M Wide
1 LUX @
1375M Distance
140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
*Lightforce highly recommends the use of our BEAST Universal Wiring Harness when installing BEAST Driving Lights (#LFDLHBEAST-U)
Beauty meets BEAST
TESTED BEYOND THE EXTREME
WATER-TIGHT HOUSING
CHEMICAL RESISTANT
WITHSTAND EXTREME CONDITIONS
HIGH IMPACT RATING
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
BEAST IN THE WILD
Freqenlty Asked Questions
Power on the lights by pressing the top section of the switch. Press the lower half of the switch to swap between Spot and Flood modes, hold switch down for 1 second to trigger BEAST Mode.
SPOT mode is ideally suited for those long-distance drives where you need to see as far down the road as possible.
FLOOD mode is best for when you need to ensure consistent visibility when navigating through winding roads.
BEAST mode uses all available power to create the most total light output. With the same wide-angle light as the Flood mode but with a much more intense central beam almost as strong as the spot to give out the highest total volume of light for distance and spread visibility.
You will need to buy 2 Beast universal harnesses to power the 3 Beast LED Driving Lights on your vehicle. 1 wiring harness will not allow 3 lights to run safely. Harness is available here.
No, you will need to purchase our Beast specific universal wiring harness seperately. This is available here. A range of vehicle specific harness are coming soon.
Yes, you will need to use our specific harness to be able to use the functionality of the 3 switchable modes and for optimal operation.
Yes, the Beast Driving Lights come with a day light running option.
BEAST - Spot Photometric
BEAST - Flood Photometric
BEAST - Beast Mode Photometric
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
• Improved peripheral vision, assisting a safe drive
• Warm white colour reduces glare and eye strain
• Consistent and precise beam patterns for driving with confidence on any road type
• Slimline footprint and lightweight
• Countless mounting opportunities for seamless vehicle integration
• A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
Specifications
LED Lifespan | 50000 hours |
---|---|
Light Tech | LED |
Number of LEDs | 36 |
Distance: 1 lux at | 1497m (PAIR) |
Effective Lumens | 10,275 / 7,826 / 13,269lm |
Raw Lumens | 16,496 / 11,025 / 19,965lm |
Colour Temperature | 5700K |
CRI | 70 |
Current Draw | 11.2 / 6.5 / 13Amps @ 13.2V |
Wattage | 172W |
Ingress Protection Rating | IP69K |
Beam Type | 3 Mode |
Diameter | 230mm |
Candela | 1,105,100 / 302,740 / 945,300cd |
Weight | 2.2kg / 4.9lb |
Warranty | 5 Years |
Light Bar Style | |
Bar Length | |
Globe Type | |
Light Tech | |
Number of LEDs | |
Reflector | |
Distance: 1 lux at | |
Distance: 0.25 lux at | |
Wave Length | |
Effective Lumens | |
Raw Lumens | |
Colour Temperature | |
CRI | |
Current Draw | |
Voltage Range | |
Voltage | |
Wattage | |
Ingress Protection Rating | |
Light Protection | |
Beam Pattern | |
Beam Length | |
Beam Type | |
Colour | |
Battery Included | |
Colour Swapping | |
Diameter | |
Dimming | |
Power Supply | |
Power Options | |
Dimensions | |
Ballast Type | |
Candela | |
CANbus Compatible? | |
Weight | |
Weight | |
Warranty | |
Footprint |